Its now mid August and the process to get all the newly installed track weathered has been completed. I found it a bit tedious as the track was installed back in June and its seems like it has taken me a long time to get this done. I guess due to the fact that I only spent a couple of hours per week on it for the last month and a half is the reason. Summer is definitely not model railroad season for me! I used the same techniques for weathering the track as I used back when I built the layout and it had On30 track initially - after the track was painted and installed, (and here's the scary part) I used suede colored craft paint to paint every tie. Next comes "painting" the rail (again) with a color made as a slurry of Rust colored weathering power and 70% rubbing alcohol. This was applied to both sides of the rail and to the tie plates as well - at this point ( see picture below) you will look at the track and think to yourself "What the hell have I done!!!" but bear with me. After that, go back with the suede craft paint and a square tipped brush and touch up the ties, especially around the tie plates. Let this dry for a day or 2 before proceeding.
Once the paint dries and the track looks terrible, the next step happens which really is the transforming piece of the weathering process. Take a soft brush ( use one that you don't mind destroying - as after this you probably wont use it again) and apply a liberal dusting of soot black weathering powder over the entire track. Then you want to use a sprayer that can produce a very fine mist and mist down the track with 70% alcohol and watch what happens!!!. The weathering aspect is then complete.
Next the track can be ballasted using a normal method that I described on my blog entry back on 22 Jan titled "Sharing". As a final touch, I spray the track and ballast with a India Ink/ alcohol mix. Be sure and give your track rail heads a good cleaning afterwards to get anything off the railheads to ensure good electrical conductivity for your locos. As mentioned all these steps add up to a time consuming process, but I am happy with the way my track looks afterwards. Our track is a model too and it deserves to not have a toy like shiny appearance that distracts viewers of our model railroads. Till next time...
 |
| Track after seude painted ties and rust colored rails |
 |
| Track after dusted with black weathering powder and misted with alcohol |
 |
| Final appearance of ballasted track |
Posts
